Optional Controls - Empire Comfort Systems BF28(B,C,G)M(N,P)-5 Installation Instructions Manual

Power-vent high-efficiency fireplace
Hide thumbs Also See for BF28(B,C,G)M(N,P)-5:
Table of Contents

Advertisement

Economy Mode (Red Button Operation)
To utilize this feature, a programmable control or thermostat must
be connected to the fireplace. A red button is located next to the
burner switches on the front control panel. See Figure 75. This is
called the economy mode.
To use this feature, both burner switches need to be in the "ON"
position, and the red button must be pressed so it is illuminated.
This will ignite the front burner. The front burner will remain on
when the red button is illuminated, and the back burner will cycle
with the thermostat. The red button acts only as an override for the
front burner.
To Deactivate
Press the red button so it is not illuminated, then the fireplace will
return to normal operation.
Page 48

OPTIONAL CONTROLS

Figure 75
Battery Operated Controls
This unit is equipped with a factory installed wireless remote.
All Remote Controls are all battery operated devices.
Optional Battery Operated Control
FRBTP Battery Operated Remote with Programmable Ther-
mostat
TRW
Battery Operated Wireless Remote Wall Thermostat
Note: These optional controls will work with the factory
installed receiver. No wiring is required.
CAUTION
Before connecting any controller, disconnect power
to the fireplace.
Adjust the remote from the instructions provided with the remote
control.
Note: If the fireplace will not be used for long periods of time,
turn the burner switches to the "OFF" position and turn the
power off at the power source.
Figure 76
30259-6-0314

Advertisement

Table of Contents
loading

Table of Contents