Bay Window Mantis Log Set Installation Instructions - Empire Comfort Systems BF28(B,C,G)M(N,P)-5 Installation Instructions Manual

Power-vent high-efficiency fireplace
Hide thumbs Also See for BF28(B,C,G)M(N,P)-5:
Table of Contents

Advertisement

BAY WINDOW MANTIS LOG SET INSTALLATION INSTRUCTIONS

7. Place the Front Right Log (E) in the right front corner of fire-
box. It should fit snug into the corner. See Figure 61.
A
C
8. Place the Top Right Log (G) onto the pins on (B), (D) and (E)
Logs. The "legs" of (G) Log will rest on (D) and (E) Logs. The
pins must fit into the holes in the bottom of (G) Log to ensure
proper alignment of (B), (D) and (E) Logs. See Figure 62.
9. Place the Top Left Log (F) onto the pins on (A) and (D) Logs.
The "legs" of (F) Log will rest on (D) Log. The pins must fit into
the holes in the bottom of (F) Log to ensure proper alignment
of (A) and (D) Logs. See Figure 5.
F
A
C
10. Verify that the Rear Logs (A) and (B) are still against the back
of the firebox.
11. Verify that the logs are not in contact with the flame sensor.
Interference with the flame sensor will effect the operation.
12. Place the door assembly on the fireplace and secure with the
main door latches located on the right and left sides of the
fireplace.
13. Close the left and right panels.
14. Reattach the top panel.
15. The installation of the log set is complete.
Page 34
E
B
D
Figure 61
G
B
D
E
Figure 62
TOP LEFT LOG (F)
FRONT LEFT LOG (C)
Log Assembly
REAR LEFT LOG (A)
TOP RIGHT LOG (G)
REAR RIGHT LOG (B)
FRONT RIGHT LOG (E)
CENTER LOG (D)
Figure 63
30259-6-0314

Advertisement

Table of Contents
loading

Table of Contents