Parameter For The Serial Interface - KERN PLS Operating Instructions Manual

8.3 Parameter for the serial interface

Menu selection:
Turn on balance using the ON/OFF-button
Press the Tare-button; the display shows horizontal lines
While this display is on, press the PRINT -button
Keep F-button pressed until the desired selection is displayed
Function
Baud rate
Output
conditions
at the
interface
* = Factory setting
Confirm setting by pressing the PRINT-button
PLS/PLJ/ALS/ALJ-BA-e-0819
Display Choice
F-button PRINT-
button
bod 1
bod
bod 2
bod 3
bod 4
bod 5*
bod 6
StAb 0*
StAb
(only ALJ
120/220 in
StAb 1
non-
verified
setting)
cont 0*
cont
cont 1
dAtE 0*
dAtE
dAtE 1
Repl 0
Repl
(Condition:
Repl 1
cont 0)
Description of the
selection options
300 bps
600 bps
1200 bps
2400 bps
4800 bps
9600 bps
Output for stable
Weighing value
Output also for
instable weighing value
Consecutive serial output deactivated, output
only when button is pressed
Consecutive serial output
Printout of the weighing values without
placeholder for date/time
Printout of the weighing values with
placeholder for date/time
Issue takes place after pressing the PRINT
key.
Automatic issue of first stable weighing value
Sequence of operations:
1. Tare
2. Place weight, issue of first stable weighing
value
3. No next issue until weight is removed
Condition: Display +/- 50 display steps
from zero
4. Place next weight
63