Parts Counting - KERN PLS Operating Instructions Manual

7.5 Parts counting

You are weighing e.g. 10 identical parts; i.e. the reference quantity is 10. The balance
will automatically calculate the average weight per part. From now the pieces to be
counted are displayed as number of parts. As a rule:
The higher the reference quantity the higher the counting accuracy.
Explanations for the balance settings:
The reference formation needs an exact determination of the weight value. The
settings „Con 1 – 5" (see chapter 8.2) influence this reference formation.
When using the counting function we recommend the setting: „Con 5".
Operation:
Turn on balance using the ON/OFF-button
Press Tare-button
While this display is on, press the F-button until PIECES
is displayed
Press PRINT-button and reference quantity appears. By
pressing the F-button, you can select 10, 20, 50 or FrEE
(by choice).
Confirm entered reference quantity by pressing the
PRINT-button. If you wish to select reference quantity by
choice, proceed to the next step.
Enter reference quantity by choice
Use the ON/OFF-button to select the value you want to
modify, use the F-button to increase the number
(the respective active value is blinking)
Confirm entered reference quantity by pressing the
PRINT-button
Place as many parts on the weighing plate as required by
the set reference quantity, confirm by pressing the PRINT-
button
58
Display:
0,000
-- -- -- --
PIECES
LoAD
00000
00017
LoAD
Proces
PLS/PLJ/ALS/ALJ-BA-e-0819
pcs
10
pcs
pcs
pcs
10