Percentage Determiation; Determination Of A Reference Weight By Weighing - KERN PLS Operating Instructions Manual

The balance is now in parts counting mode counting all
the parts that are on the weighing plate (e.g. 7 parts)
To return to weighing mode press the Tare-button
While this display is on, press the F-button until PIECES
is displayed
Press Tare-button, balance is now in weighing mode

7.6 Percentage determiation

Percentage determiation allows the display of the weight in percent, in relation to a
reference weight.

7.6.1 Determination of a reference weight by weighing

Operation:
Turn on balance using the ON/OFF-button
Press Tare-button
While this display is on, keep the F-button pressed until
PErc A is displayed
Press PRINT-button
Put on reference weight, press the PRINT-button, the
weight is stored as reference (100%).
Now place items to test onto the weighing plate, the
percentage in relation to the reference part is displayed.
To return to weighing mode press the Tare-button
While this display is on, press the F-button
Press Tare-button, balance is now in weighing mode
PLS/PLJ/ALS/ALJ-BA-e-0819
pcs
7
-- -- -- --
PIECES
0,000 g
Display:
0,000
-- -- -- --
PErc A
LoAD
ProcES
100.00 %
70.37 %
-- -- -- --
0 g
59