Ip Routing Policy Setup; Figure 37-2 Ip Routing Policy Setup - ZyXEL Communications ZyWall 10 User Manual

ZyWALL 10~100 Series Internet Security Gateway
address and port, ToS and precedence (fields in the IP header) and length. The inclusion of length criterion
is to differentiate between interactive and bulk traffic. Interactive applications, e.g., telnet, tend to have
short packets, while bulk traffic, e.g., file transfer, tends to have large packets.
The actions that can be taken include:
•
Routing the packet to a different gateway (and hence the outgoing interface).
•
Setting the ToS and precedence fields in the IP header.
IPPR follows the existing packet filtering facility of RAS in style and in implementation. The policies are
divided into sets, where related policies are grouped together. A user defines the policies before applying
them to an interface or a remote node, in the same fashion as the filters. There are 12 policy sets with six
policies in each set.

37.4 IP Routing Policy Setup

Menu 25 shows all the policies defined.
Policy
Set #
------
1
2
3
4
5
6
To setup a routing policy, perform the following procedures:
Step 1.
Type 25 in the main menu to open Menu 25 – IP Routing Policy Setup.
37-2
Menu 25 - IP Routing Policy Setup
Name
-----------------
test
_______________
_______________
_______________
_______________
_______________
Enter Policy Set Number to Configure= 0
Edit Name= N/A
Press ENTER to Confirm or ESC to Cancel:

Figure 37-2 IP Routing Policy Setup

Policy
Set # Name
------ -----------------
7 _______________
8 _______________
9 _______________
10 _______________
11 _______________
12 _______________
IP Policy Routing