ZyXEL Communications ZyWall 10 User Manual page 508

ZyWALL 10~100 Series Internet Security Gateway
FIELD
Authentication Press [SPACE BAR] to choose from MD5 or SHA1 and then press [ENTER].
Algorithm
Key Enter the authentication key to be used by IPSec if applicable. The key must
be unique. Enter 16 characters for MD5 authentication and 20 characters for
SHA-1 authentication. Any character may be used, including spaces, but
trailing spaces are truncated.
AH Setup The AH Setup fields are N/A if you chose an ESP Active Protocol.
SPI (Decimal) The SPI must be from one to four unique decimal characters ("0" to "9")
long.
Press [SPACE BAR] to choose from MD5 or SHA1 and then press [ENTER].
Authentication
Algorithm
Key Enter the authentication key to be used by IPSec if applicable. The key must
be unique. Enter 16 characters for MD5 authentication and 20 characters for
SHA-1 authentication. Any character may be used, including spaces, but
trailing spaces are truncated.
When you have completed this menu, press [ENTER] at the prompt "Press ENTER to Confirm..." to save
your configuration, or press [ESC] at any time to cancel.
39-16
Table 39-5 Menu 27.1.1.2: Manual Setup
DESCRIPTION EXAMPLE
MD5
123456789a
bcde
N/A
N/A
N/A
VPN/IPSec Setup