Chapter 38 Call Scheduling; Introduction To Call Scheduling; Figure 38-1 Schedule Setup - ZyXEL Communications ZyWall 10 User Manual

Call scheduling allows you to dictate when a remote node should be called and for how long.

38.1 Introduction to Call Scheduling

The call scheduling feature allows the ZyWALL to manage a remote node and dictate when a remote node
should be called and for how long. This feature is similar to the scheduler in a videocassette recorder (you
can specify a time period for the VCR to record). You can apply up to 4 schedule sets in Menu 11.1 -
Remote Node Profile. From the main menu, enter 26 to access Menu 26 - Schedule Setup as shown next.
Schedule
Set #
------
1
2
3
4
5
6
Lower numbered sets take precedence over higher numbered sets thereby avoiding scheduling conflicts. For
example, if sets 1, 2, 3 and 4 are applied in the remote node, then set 1 will take precedence over set 2, 3 and
4 as the ZyWALL, by default, applies the lowest numbered set first. Set 2 will take precedence over set 3 and
4, and so on.
You can design up to 12 schedule sets but you can only apply up to four schedule sets for a remote node.
To delete a schedule set, enter the set number and press [SPACE BAR] and then
Call Scheduling
Menu 26 - Schedule Setup
Name
------------------
______________
______________
______________
______________
______________
______________
Enter Schedule Set Number to Configure=
Edit Name=
Press ENTER to Confirm or ESC to Cancel:

Figure 38-1 Schedule Setup

[ENTER] or [DEL] in the Edit Name field.
ZyWALL 10~100 Series Internet Security Gateway
Call Scheduling
Schedule
Set #
------ ------------------
7 ______________
8 ______________
9 ______________
10 ______________
11 ______________
12 ______________
Chapter 38
Name
38-1