7.
Remove the eight hex-head screws from
the evaporator cover and remove the
cover.
Evaporator Cover Screws
Bimetal
Evaporator
8.
To remove the bimetal:
a) Disconnect the two bimetal connec-
tors from the wiring harness (see the
top right photo).
b) Unclip the bimetal and remove it from
the evaporator tubing.
Defrost Heater
4-28
9.
To remove the defrost heater:
a) Disconnect the two heater connectors
from the wiring harness.
b) Bend the tabs up on the three bottom
brackets, pull the heater out of the
slots, and remove the heater.
Bimetal Connectors
Unclip Bimetal
Bend Tab Up
Defrost Heater