Removing A Temp-Controlled Drawer Cover - KitchenAid KBFC42FS Technical Education

REMOVING A TEMP-CONTROLLED DRAWER COVER

WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before
operating.
Failure to do so can result in death or
electrical shock.
1. Unplug refrigerator or disconnect power.
2. Remove the temp-controlled drawer for
the cover you are removing. NOTE: The
temp-controlled drawer cover includes the
user Interface & LED lighting.
Temp-Controlled Drawer Covers
3. Remove the four (two on both sides) hex-
head screws from the center divider cov-
er (see the top right photo).
4. Rotate the front of the center divider cov-
er up, pull out, and remove the cover.
Center Divider Cover
4-8
Center Divider Cover
Screws (2 of 4)