Removing The Freezer Drawer Switch - KitchenAid KBFC42FS Technical Education

REMOVING THE FREEZER DRAWER SWITCH

WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before
operating.
Failure to do so can result in death or
electrical shock.
1. Unplug refrigerator or disconnect power.
2. Remove the freezer drawer (see page
4-20 for the procedure).
Freezer Drawer Switch
3. Remove the two hex-head screws from
the freezer drawer switch housing and
remove the housing.
Screws
Actuator
Freezer Drawer
Switch Housing
4-21
4. Disconnect the two wires from the freezer
drawer switch terminals.
Freezer Drawer
Switch Wires
5. Push the freezer drawer switch out of the
housing cutout.
REASSEMBLY NOTE: When you install the
switch in the housing, make sure that you po-
sition it with the locating tab and actuator as
shown.
Locating Tab
Actuator
Locating Tab