Removing The Unit Compartment Components - KitchenAid KBFC42FS Technical Education

REMOVING THE UNIT COMPARTMENT COMPONENTS

WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before
operating.
Failure to do so can result in death or
electrical shock.
1. Unplug refrigerator or disconnect power.
2. Lift the decorative panel off the pins at
each end and remove the panel.
Decorative Panel
3. Remove the eight hex-head screws from
the front cover of the unit compartment
and remove the cover.
Unit Compartment Front
Cover (8 Screws)
Power Switch Pinouts
(1) Unused
(2) WH
(3) Line (Ribbed)
Inverter Compressor Fan Motor Main & LV Boards
24V Transformer
4. To remove the power switch:
a) Push the bottom of the switch forward
as far as possible, then use a flat-blade
screwdriver, and alternately press the
top retainers against the switch body.
Push the switch out of the bracket cut-
out.
Top Retainers
b) Disconnect the four wire connectors
from the power switch terminals, and
remove the switch.
Wire Connectors (4)
(4) Unused
(5) BK
(6) Line (Smooth)
4-12
Condenser
Power Switch
Top Retainers