Digisol DG-SC2600 Setup Manual page 8

Rule2:
1. Select radio button for "User-defined Service Name"
2. Enter the Service Name as "2600W_rtsp". This is just a name for the rule for identification
purpose.
3. Select Protocol as "tcp"
4. Select the WAN Setting as "Interface"
5. Select the WAN Interface as "pppoe1". This is the ADSL connection name which is connected to
Internet.
6. Enter the WAN Port as "554"
7. Enter the LAN Open Port as "554"
8. Enter the LAN Ip Address as "192.168.1.8"
Click "Apply Changes" to save the settings.
SETUP GUIDE
Access Remote IP Camera using DDNS