Advertisement
SETUP GUIDE
Access Remote IP Camera using DDNS
The Gateway IP should be the LAN IP address of the router i.e. "192.168.1.1" in this example. Enter the
DNS server IP as shared by your ISP else you can enter the Global DNS as 4.2.2.2 and 4.2.2.1.
Click "Apply" to save the settings.
Step 3 : Configure DDNS Settings on the IP Camera
Click on the "Network > Dynamic DNS" tab on top and set the following settings:
Enable DDNS: Enable
Provider: no-ip.com
Host Name: digisolcam.no-ip.org (this is the host name which is configured in the DDNS i.e no-ip.com
Account.)
Advertisement
