Kodak 645 User Manual page 102

Using the Image LCD
Zooming
With the Region of Interest box enabled,
(page 101) press the OK button.
There are three zoom levels. The first actuation
zooms to 1:4 (one pixel displayed for every four
in the image), the second to 1:1, and the third
returns to the un-zoomed 1:16.
When zoomed to 1:1, the crosshairs appear
but the Region of Interest box does not. You
can still pan, however.
Panning
With the Region of Interest box enabled, press
the appropriate part of the Four-way switch to
move the Region of Interest box around.
If the edge of the thumbnail is reached, the image
moves in the opposite direction.
Back
Contents
Navigating Through Images in Zoom Mode
Press the Cancel button to turn the Region of
Interest box off and navigate
images.
Luminometer Crosshairs
The crosshairs, which appear when the Region
of Interest box is on, indicate the level of
luminance channel saturation of pixels below the
center of the crosshairs. This level is indicated in
stops (-3 to 3.25) and percentages (2 to 180%).
Next Index
(page 100) to other
102