Disconnecting The Dcs 645 From The Camera Body; Connecting Flash/Strobe Units - Kodak 645 User Manual

The Basics
Disconnecting the DCS 645 from the
Camera Body
Place the camera on a table or other flat
1
surface.
If the DCS 645 is being powered by battery,
2
remove the battery.
If the DCS 645 is being powered by AC
adapter, disconnect the AC adapter.
3 Remove the IEEE 1394 cable
connected.
Rotate the DCS 645 Release button to the left
4
and press, then pivot the top of the camera
body away from the DCS 645.
Contents
Back
(page 78) if it is
Next
Index
Carefully remove the DCS 645 from the
5
camera body.

Connecting Flash/Strobe Units

Connect flash and studio strobes following the
instructions in your camera body's manual.
DCS 645
Release
button
53