Table of Contents
Advertisement
Configuring Your Camera
Long Exposure
The Long Exposure property reduces
accumulated pattern noise in long exposure
images.
Long Exposure Processing is applied
immediately after image capture. As a result,
there is a greater lag time between exposures,
thereby reducing "burst" mode capture rate and
depth. This is true even when the property is set
to "Exposures >1/4 sec." and a shutter speed
shorter than 1/4 sec. is used. For example, if you
are capturing an image using a 10 second
shutter speed, there will be 10 seconds of
processing immediately after image capture.
1
Display the Properties menu
Contents
Back
(page
70).
Next
Index
Select Long Exposure.
2
Choose one of the following:
3
Never Apply—Long Exposure processing is
not applied to any image, regardless of shutter
speed.
Exposures >1/4 sec.—Long Exposure
processing is applied to images taken with
shutter speeds longer than 1/4 second.
All Exposures—Long Exposure processing is
applied to all images after capture, regardless
of shutter speed.
72
Advertisement
Table of Contents
