Capturing And Processing Images; Overview - Kodak 645 User Manual

Professional
Hide thumbs Also See for 645:
Table of Contents

Advertisement

Capturing and Processing Images

Overview

Capturing and Processing Images
This section describes operations specific to the
DCS 645.
Capture images using the Shutter Release
button on the camera body. Refer to the User's
Manual for your CONTAX 645, MAMIYA 645AF,
or MAMIYA 645AFD.
Refer also to the list of features that are not
supported
(page 119)
with the CONTAX 645, MAMIYA 645AF, or
MAMIYA 645AF camera body.
Contents
Back
when the DCS 645 is used
Next
MAMIYA 645AF only: You must half-press the
Shutter Release button for 1/4 second before
capturing an image. If you press the button fully
to the release position, the shutter will not
actuate. You must then fully release the Shutter
Release button and perform a half-press for 1/4
second.
To capture sequential images using a MAMIYA
645AF camera body, you must completely lift
your finger off the camera body's Shutter
Release button after each image capture.
Index
83

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dcs pro back 645

Table of Contents