Table of Contents
Advertisement
Configuring Your Camera
Setting Battery Save Onset
When the DCS 645 is powered by battery and
you don't touch any controls during the specified
Battery Save Onset time, it enters Battery Save
state. You can change the onset time
from 1:00:00 to 23:59:59 (HH:MM:SS).
The default onset time is 60 minutes.
Display the Properties menu
1
Choose Battery Save Onset from the
2
Properties menu.
The Battery Save Onset screen appears.
3
Press the left or right side of the Four-way
switch to sequence through the numeric fields.
Press the top or bottom of the Four-way switch
4
to change the highlighted numeric value.
Press the OK or Cancel button.
5
Contents
Back
(page 82)
(page
70).
Next
Index
Setting Display Off Time
Extended use of the Image LCD will drain your
battery. For this reason, the LCD turns off after
the specified Display Off Time.
The default Display Off Time is 60 seconds.
1
Display the Properties menu
Choose Display Off Time from the Properties
2
menu.
3
Press the left or right side of the Four-way
switch to sequence through the numeric fields.
Press the top or bottom of the Four-way switch
4
to change the highlighted numeric value.
Press the OK or Cancel button.
5
(page
70).
71
Advertisement
Table of Contents
