Before You Begin
Caring for Your DCS 645
Cleaning the IR or Anti-aliasing Filter
Remove the filter from the DCS 645
1
Gently blow off the dust using commercially
2
available canned air (low pressure). If the filter
is still dirty, contact your dealer or service
representative.
If the imager is dirty, check the KODAK Web
3
site (www.kodak.com) for instructions on
cleaning. Choose "Service and Support," then
under Professional Photography choose
"Cameras, Digital" then "DCS 645." Follow the
instructions under Cleaning
Recommendations for CCD Coverglass.
Contents
Back
Storing
(page
40).
These storage tips apply to the DCS 645. Store
the camera body as described in its User's
Manual.
If you have an IR or anti-aliasing filter not in use,
store it in the pocket on the included body cap.
Next
Index
111