Cab-2/Cab-1 Commands For Your Vehicle - Lionel Railroad Speeder Owner's Manual

Command Control operations

CAB-2/CAB-1 commands for your vehicle

T
he CAB-2/CAB-1 commands for the vehicle are outlined below.
THROTTLE
Turn the THROTTLE to the right to accelerate, left to decelerate.
AUX1, 0
Stops and resets the vehicle to the idle position; ready to start in the forward direction.
AUX1, 8
Turns the strobe light off.
AUX1, 9
Turns the strobe light on.
AUX2
Toggles the headlights on and off.
DIR
The DIR key is used to change the directional state of your vehicle. Use the DIR button to decelerate to a
complete stop; turn the throttle up, and the vehicle will accelerate in the opposite direction. There is no
neutral state.
BRAKE AND BOOST
The BOOST and BRAKE command buttons give you incremental control of speed and are the superior
way to handle grades, gradual stops-and-starts, and more.
In the TrainMaster Command Control environment, the Boost and Brake keys will increase and decrease
the speed of your vehicle only as long as the keys are held down.
When operating your Speeder with the LEGACY system, the Brake feature can be set to maintain the
speed without reverting back to the previous set speed.
Note! These settings will be lost when you assign a new engine ID number.
HALT
Press HALT to shut down all PowerMaster electrical output on your railroad. Stops all Command-
equipped Lionel vehicles in operation.
Note!
Use only in emergency situations.
HALT
5