Cab-1 And Cab-1L Remote Controller Commands - Lionel 78-2055-250 Owner's Manual

Command control trackside crane

Table of Contents

Operating the Trackside Crane

CAB-1 & CAB-1L Remote Controller commands

se your CAB-1 Remote Controller to operate the Trackside Crane.

Rotates the crane cab.

Note

Caution

Do not allow the hook to go all the way down and

then start to ascend again. If you notice that the

hook begins to ascend when it reaches its lowest

point, press and hold the BOOST button (up arrow)

immediately to avoid reversing the controls.

Toggles the front work lights on and off.

Note

Lowers the Boom.

Raises the Boom.

You can operate the hooks or the

boom while the cab is rotating.

Lowers the main hook on the crane.

Raises the main hook on the crane.

Lowers the auxiliary hook on the crane.

Raises the auxiliary hook on the crane.

Note

We recommend that you keep a light weight on the

auxiliary hook for optimal performance.

The front work lights always turn on when the crane is powered up. Use

AUX1, 4 to turn off the lights.

Table of Contents