Connections - Manitowoc QuietQube Indigo Series Technician's Handbook

CONNECTIONS

Manifold gauge sets must utilize low loss fittings to
comply with U.S. Government rules and regulations.
Make these connections:
Ice Machine Head Section - All Models
1. Suction side of the compressor through the
suction shut-off valve or suction access valve.
2. Discharge side of the compressor through the
liquid line shut-off valve or high side access valve.
3. Receiver access valve, which evacuates the area
between the check valve in the liquid line and the
liquid line solenoid valve..
Recovery/evacuation of a QuietQube
system requires connections at three points for
complete system recovery/evacuation. Check valves
are located in the ice machine head section and the
ICVD condensing
connections between the receiver access valve and
the high and low side access valves on the front or
rear of the ice machine to recover and evacuate the
entire system
Refrigerant Recovery Connections Ice Machine Head
198
Warning
!
unit. Three
Part Number STH026 8/12
remote
®
point requires
CONNECTIONS
MUST BE MADE
AT THREE
POINTS ON
HEAD SECTION
FOR COMPLETE
REFRIGERANT
RECOVERY ON
ALL
QUIETQUBE
MODELS.
®