1. Manuals
  2. Brands
  3. NEC Manuals
  4. Laptop
  5. VersaDayLite
  6. User manual

NEC VersaDayLite User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
The
information
materials, is the valuable property of NEC Computers Inc. (hereinafter "NEC Computers") and/or its
licensors. NEC Computers and/or its licensors, as appropriate, reserve all patent, copyright and other
proprietary rights to this document, including all design, manufacturing, reproduction, use, and sales
rights thereto, except to the extent said rights are expressly granted to others.
The NEC Computers product(s) discussed in this document are warranted in accordance with the
terms of the Warranty Statement accompanying each product. However, actual performance of each
such product is dependent upon factors such as system configuration, customer data, and operator
control. Since implementation by customers of each product may vary, the suitability of specific
product configurations and applications must be determined by the customer and is not warranted by
NEC Computers.
To allow for design and specification improvements, the information in this document is subject to
change at any time, without notice. Reproduction of this document or portions thereof without prior
written approval of NEC Computers is prohibited.
As an ENERGY STAR partner, NEC Computers Inc. has determined that this product meets the
ENERGY STAR guidelines for energy efficiency. ENERGY STAR is a U.S. registered mark.
NEC is a registered trademark; Versa is a U.S. registered trademark; DayLite and VersaGlide are
trademarks; and UltraCare is a U.S. registered service mark of NEC Corporation and/or one or more of its
subsidiaries. All are used under license.
Microsoft, Windows and Windows 2000 are registered trademarks of Microsoft Corporation.
Transmeta, Crusoe, and LongRun are trademarks of Transmeta Corporation.
All other trademarks and registered trademarks are the property of their respective trademark
owners.
Proprietary Notice and Liability Disclaimer
disclosed
in
this
First Printing - May 2001
NEC Computers Inc.
15 Business Park Way
Sacramento, CA 95828
All Rights Reserved
document,
including
Copyright 2001
all
designs
and
related

Advertisement

Table of Contents
loading

Related Manuals for NEC VersaDayLite

Summary of Contents for NEC VersaDayLite

  • Page 1 ENERGY STAR guidelines for energy efficiency. ENERGY STAR is a U.S. registered mark. NEC is a registered trademark; Versa is a U.S. registered trademark; DayLite and VersaGlide are trademarks; and UltraCare is a U.S. registered service mark of NEC Corporation and/or one or more of its subsidiaries. All are used under license.

  • Page 2: Table Of Contents

    2 Getting Started NEC VersaGlide Touchpad....................2-2 Making VersaGlide Adjustments................2-3 VersaGlide Tips ......................2-3 Power Sources for Your NEC Versa Notebook ..............2-3 AC Adapter ........................2-3 Connecting the AC Adapter..................2-4 Powering On Your System ..................2-6 Primary Battery Pack ......................2-6 Secondary Battery Pack .....................
  • Page 3 Taskbar Icons .......................4-3 NEC Utilities ........................4-4 NEC Customize Utility ....................4-4 NEC Customize Utility Screen..................4-4 Using the NEC Customize Utility ................4-4 Installing NEC Wallpaper ...................4-5 Application and Driver CD ....................4-5 Launching the Application and Driver CD with Windows 2000 ........4-5 Application and Driver CD Dialog Box..............4-6 Installing the Application and Driver CD Software ............4-6...
  • Page 4 Connecting the External Floppy Diskette Drive ............5-3 Disconnecting the External Floppy Diskette Drive............. 5-3 External Variable-Speed CD-ROM Drive ................. 5-3 Using the CD-ROM Drive with your NEC Versa Notebook........5-6 Using the USB CD-ROM Drive to Play Audio CDs ..........5-8 Disconnecting the CD-ROM Drive................5-8 CD Care ........................
  • Page 5 7 Traveling Tips Preparing for Travel ......................7-2 Packing for Travel......................7-2 Using Power Connections ....................7-3 Getting Through Customs ....................7-3 Connecting to the Internet ....................7-4 Connecting Using a Modem..................7-4 Connecting Using a LAN....................7-4 8 Using Peripheral Devices External Monitor ........................8-2 External Audio Options......................8-3 USB Devices ........................8-4 9 Using Multimedia Audio..........................9-2...
  • Page 6 A Setting Up a Healthy Work Environment Making Your Computer Work for You................A-2 Arrange Your Equipment....................A-3 Adjust Your Chair......................A-3 Adjust Your Input Devices....................A-3 Adjust Your Screen or Monitor..................A-4 Vary Your Workday......................A-5 Pre-Existing Conditions and Psychosocial Factors ............A-5 B Specifications System Components......................

  • Page 7: Using This Guide

    DayLite User's Guide gives you the information you need to maximize the use of your NEC Versa notebook computer. Read this guide to familiarize yourself with the NEC Versa and its features. For specific information see Chapter 1, “Introducing Your NEC Versa,” to acquaint yourself with system hardware.

  • Page 8: Text Setup

    Text that you must type or keys that you must press are presented in bold type. For example, type and press Enter Related Documents See the NEC Versa DayLite Quick Setup sheet to help get your system up and running. x Using This Guide...

  • Page 9: Introducing Your Nec Versa

    Introducing Your NEC Versa Before You Begin About Your NEC Versa Notebook Around the Front of the System Around the Back of the System Around the Left Side of the System Around the Right Side of the System Around the Bottom of the System...

  • Page 10: Before You Begin

    This manual is the user’s guide for the NEC Versa DayLite notebook computer. The coloring of your NEC Versa may vary from the units shown in this guide. The colors of the systems used in this User’s Guide are for illustrative purposes only.

  • Page 11: About Your Nec Versa Notebook

    Around the Front of the System The NEC Versa is compact with features on every side. First, look at the front of the NEC Versa. The following sections describe front features, beginning with the liquid crystal display (LCD) panel.

  • Page 12: Lcd Panel

    “Keyboard Panel.” Base Unit The base unit of your NEC Versa offers the following features, described after the figure. After extended use, the surface of the base unit, below the keyboard, may become hot to the touch.

  • Page 13: Operating Status Leds

    B – Caps Lock D – Num Lock — Hard Disk Drive — lights when the NEC Versa writes data to or retrieves data from the internal hard disk drive. — Caps Lock — lights when Caps Lock is on.

  • Page 14: Keyboard Panel

    Keyboard Panel The NEC Versa notebook’s keyboard offers the following features, which are described after the figure. Keyboard A – Function Keys D – Cursor Control Keys B – Numeric Keys E – Control Keys C – Windows Keys Function keys — Twelve function keys,...
  • Page 15 To use control keys, press and hold the control key while pressing another key. For example, “press ” means to hold down the Ctrl c key and type the letter c. How the key combination works depends on the Ctrl application you are running. Introducing Your NEC Versa 1-7...

  • Page 16: Front Features

    C – Battery Charging LED B – Power Status LED IR Port — Use this infrared (IR) port to transfer files between your NEC Versa and an IR-equipped desktop or notebook computer or to print to an IR-capable printer. Power Status LED — This LED lights to indicate the following: —...

  • Page 17: Around The Back Of The System

    C – External Monitor (Video) Port F – LAN Cable Jack AC Power Port — Attaches the NEC Versa to a power source, such as the AC adapter. Vent — Allows your system to cool properly and maintain a safe operating temperature.

  • Page 18: Around The Right Side Of The System

    Always keep the vents unobstructed to allow proper system cooling. Around the Right Side of the System The right side of the NEC Versa notebook offers the features, which are described after the figure. Right-side features A – Headphone Jack/External Speakers D –...

  • Page 19: Power Button

    — Hold the Power button in place for four or more seconds to power off the system (power override). Only use this option if you cannot power off your system using Start, Shut Down. Introducing Your NEC Versa 1-11...

  • Page 20: Around The Bottom Of The System

    Around the Bottom of the System The bottom of the NEC Versa notebook offers the following features, which are described after the figure. Bottom features A – Memory Module Bay D – Secondary Li-Ion Battery B – System Feet E – Battery Release Latch C –...

  • Page 21: Getting Started

    Getting Started NEC VersaGlide Touchpad Power Sources for Your NEC Versa Notebook AC Adapter Primary Battery Pack Secondary Battery Pack System Batteries System Care...

  • Page 22: Nec Versaglide Touchpad

    NEC VersaGlide Touchpad The NEC VersaGlide is an easy way to control the cursor with your finger. Lightly glide your finger across the NEC VersaGlide and the cursor follows. The NEC VersaGlide provides standard mouse functionality, plus more. VersaGlide features...

  • Page 23: Making Versaglide Adjustments

    AC Adapter Use the AC adapter and power cable that came with your NEC Versa notebook to run your computer on alternating current (AC) power, or to recharge the batteries. Use the AC adapter whenever a wall outlet is nearby.

  • Page 24: Connecting The Ac Adapter

    Contact the local dealer to purchase the correct power cable. Connect the AC adapter as follows: Connect the AC adapter cable to the power port on the left side of your NEC Versa notebook. 2-4 Getting Started...
  • Page 25 Do not cover or place objects on the AC adapter. Keeping the adapter clear of objects lets the adapter cool properly during use. Only use the AC adapter that comes with your NEC Versa notebook. Although other adapters look similar, using them can damage your system.

  • Page 26: Powering On Your System

    The NEC Versa notebook comes with a rechargeable Lithium Polymer (Li-Poly) battery behind the LCD panel. This battery is not user-replaceable. Secondary Battery Pack The NEC Versa notebook comes with a secondary rechargeable Lithium Ion (Li-Ion) battery pack that is easy to install and remove. Secondary Lithium-Ion battery A –...

  • Page 27: Determining Battery Status

    Read the precautions printed on the battery. Determining Battery Status Your NEC Versa notebook system provides tools to help you keep track of the power levels of the primary and secondary batteries. If your system is configured to display the power icon on the taskbar (default setting), an electrical plug appears when the system is connected to an AC power source or a battery icon appears when the system is not connected to an AC power source.

  • Page 28: Returning The Battery To Its Normal State

    Leave the battery in the system and connect your NEC Versa notebook to the AC adapter and a wall outlet. If you connect the system to AC power and keep the system within standard operating temperatures, the batteries recharge in approximately 4.5 hours when off, and 8 hours when on.

  • Page 29: Replacing The Battery

    Discoloration, warping. Hot to the touch. Strange odor. Replace the secondary battery installed in your NEC Versa notebook system as follows. Note Use the batteries in the NEC Versa notebook computer for which they are designed. Installing another manufacturer’s battery, or using a combination of very old and new batteries can deteriorate battery and equipment performance.

  • Page 30: Removing The Battery

    Continue to hold the battery release latch as you slide the battery out of the system. Removing the battery A – Battery Bay Connectors C – Secondary Li-Ion Battery B – Battery Bay Release Latch Insert the new battery as follows: Locate the alignment grooves on the edge of the battery.

  • Page 31: Charging The Battery

    Charging the Battery Charge the primary and secondary batteries by simply connecting your NEC Versa system to an AC power source. It takes approximately 8 hours to fully charge the battery while the system is on, and 4.5 hours while the system is off. To monitor the charging activity, observe the battery charging LED on the front of the system.

  • Page 32: Precautions For Recharging The Battery

    During charging, keep the environmental temperature between 32° F and 104° F (0° C to 40° C). System Batteries Your NEC Versa notebook is equipped with a primary Lithium Polymer battery and a secondary Lithium Ion battery to help prevent data loss. Only the secondary battery is removable.

  • Page 33: System Care

    System Care The NEC Versa notebook is designed to be a durable, dependable system built for extensive use and travel. Follow these guidelines to maintain the condition and performance of your computer. Immediately turn off and unplug the NEC Versa notebook under the following conditions: The power cord is damaged or frayed.

  • Page 34: Storage Requirements

    LCD screen — Carefully wipe the LCD screen with a soft cloth or a screen wipe designed for that purpose. Special screen wipes are available through your local computer dealer. System case — NEC recommends that you carefully wipe the case with a slightly damp, almost dry cloth. 2-14 Getting Started...

  • Page 35: Using The Bios Setup Utility

    Using the BIOS Setup Utility Introducing BIOS Setup Entering BIOS Setup Managing System Power Updating the BIOS Configuring the Switch Settings...

  • Page 36: Introducing Bios Setup

    Introducing BIOS Setup Your NEC Versa DayLite computer comes with a hardware program called BIOS Setup that allows you to view and set system parameters. BIOS Setup also allows you to set password features that protect your system from unauthorized use.

  • Page 37: Bios Setup Main Menu

    BIOS Setup Main Menu After you press , the system displays the BIOS Setup Main Menu screen, similar to the following. Main Setup Menu How to Use Setup The Setup utility has a Main Menu window and five top-level menus with submenus. The menu bar at the top of the Main Menu window lists the following top-level menus.

  • Page 38: Setup Key Functions

    Use the keys listed in the legend bar on the bottom of the Setup menu to make the selections or exit the current menu. The following table describes the legend keys. Setup Key Functions Function Provides help for the parameter field being displayed.

  • Page 39: Main Menu

    Main Menu Choose the Main menu by selecting Main in the legend bar on the Main menu screen. Other Main menu options are available by selecting submenus. Use the arrow keys to select one of the Main menu options and press Enter to select a submenu.
  • Page 40 Main Menu Items Menu Item Settings (default is bold) Internal HDD Displays the HDD specification Example: HITACHI_DK23CA-20-(PM) Bring up the Internal HDD submenu by pressing Enter. The submenus include Type and LBA Format. See the table, “Internal HDD Menu Items” for descriptions of each submenu and its fields.
  • Page 41 Internal HDD Submenu Items Menu Item Settings (default is bold) Type Auto, None, User When set to Auto, the values for Cylinders, Heads, Sectors, and Maximum Capacity as read only. When set to Auto, the BIOS detects what the drive is capable of, not the translation mechanism that was used to format the drive.

  • Page 42: Advanced Menu

    Internal HDD Submenu Items Menu Item Settings (default is bold) LBA Mode Control Enabled, Disabled When Enabled is selected, it causes logical block addressing to be used in place of cylinders, heads, and sectors. When Type is set to Auto, the value in the LBA Mode field is auto-detected and the field is read only.
  • Page 43 Setting items on this menu to incorrect values can cause your system to malfunction. Advanced Menu Menu Item Settings (default is bold) BootUp Num-Lock LockOn, LockOff Selects the state for Num Lock at power on. PS/2 Mouse Enabled, Disabled Enabled forces the PS/2 mouse port to be enabled regardless of whether a mouse is present.

  • Page 44: Security Menu

    Security Menu Choose the Security menu by selecting Security from the Main menu screen. Other Security menu options are available by selecting submenus. Use the arrow keys to select one of the Security menu options and press Enter to select a submenu.

  • Page 45: Boot Menu

    Boot Menu Choose the Boot menu by selecting Boot in the legend bar on the Main menu screen. Other Boot menu options are available by selecting submenus. Use the arrow keys to select one of the Boot menu options and press Enter to select a submenu.

  • Page 46: Managing System Power

    Lithium-Ion battery). Managing System Power In the Windows 2000 operating system environment, your NEC Versa manages its power resources using the Advanced Configuration and Power Interface (ACPI) while the system is powered on using AC or battery (DC) power. ACPI enables the operating system to manage the power given to each attached device and to turn off a device when not in use.

  • Page 47: Windows 2000 Power Schemes

    Windows 2000 Power Schemes Use the Power Schemes options to define the appropriate Power scheme for your system, and to set timeouts for standby, LCD panel, and hard disk. Define parameters for your system when running under AC (plugged in) or DC (running on batteries) power.

  • Page 48: Windows 2000 Alarms

    System standby — Selects the system standby timeout period for your system when running under AC or DC power. System hibernates — Selects the system hibernate timeout period for your system when running on AC or DC power. Windows 2000 Alarms Use the Alarms screen to define the point at which the battery alarm activates.

  • Page 49: Windows 2000 Advanced

    Windows 2000 Advanced The Advanced window allows you to select behaviors for the taskbar icon, standby password, LCD panel, when closed, and the Power button. Advanced Parameter Default Setting Alternate Setting(s) Always show icon on unchecked checked taskbar Prompt for password checked unchecked when computer goes off...

  • Page 50: Windows 2000 Power Management States

    Windows 2000 Power Management States ACPI uses different levels or states of power management. The power management states occur automatically, based on the system’s default settings, or manually, when invoked. Settings are configurable to occur while on battery power or AC power. The Windows 2000 ACPI power management states include: LCD timeout —...

  • Page 51: Updating The Bios

    Perform the BIOS Update Obtaining the BIOS Update If you are informed that the default BIOS needs an update contact the NEC Computers Support Services at (800) 632-4525, Fax (801) 579-1552, or access the web site, www.neccomp.com to obtain a copy of the BIOS update.
  • Page 52 A message similar to the following appears: The NEC BIOS Update Utility should not be used to modify the BIOS in a Versa system which is docked. If your Versa is docked, please exit the BIOS Update Utility, power down, and undock your Versa before running the utility.

  • Page 53: Configuring The Switch Settings

    B –Memory Module Bay Cover Remove the screw and lift off the memory module bay cover. See “Identifying the Switch Settings” for information about each setting. Reassemble the NEC Versa components as follows. Replace the memory module bay cover. Replace the screw.

  • Page 54: Identifying The Switch Settings

    The following list identifies each switch setting and its function. Switch 1 — Password override — The default setting is “OFF.” If you forget your password and cannot access the data on your NEC Versa, change the setting to “ON” and your current password is erased.

  • Page 55: Using The Operating System And Utilities

    Using the Operating System and Utilities Microsoft Windows Introduction NEC Utilities Transmeta LongRun Utility Application and Driver CD NEC INFO Center Product Recovery CD Installing Windows 2000 Using a USB Device...

  • Page 56: Microsoft Windows Introduction

    LAN cable to your system or install a LAN card for network access. Your NEC Versa comes with all the software you need to get started on the most popular services available today. For a fee, online services give you access to the Internet, email, the world wide web, travel information, news reports, and more.

  • Page 57: Taskbar Icons

    If you are using this product outside of the United States or Canada, some online services may require a long-distance or international call. NEC Customize— Gives you the option to launch the Application and Driver CD, install the NEC Wallpaper, or install the Transmeta LongRun Utility.

  • Page 58: Nec Utilities

    NEC Customize utility Transmeta LongRun Utility. NEC Customize Utility The NEC Customize utility gives you the option to install or launch the Application and Driver CD —to install a variety of software applications, drivers, utilities, internet browsers, and the NEC INFO Center.

  • Page 59: Installing Nec Wallpaper

    A variety of third-party software applications, drivers, utilities, internet browsers and the NEC INFO Center are provided on the Application and Driver CD that ships with your NEC Versa DayLite system. Some of the drivers are already installed as part of your operating system environment.

  • Page 60: Application And Driver Cd Dialog Box

    Note If the NEC Customize icon is not available, double click My Computer on the desktop and then click the CD icon. The Application and Driver CD dialog box appears. Application and Driver CD Dialog Box The Application and Driver CD dialog box consists of the following components.

  • Page 61: Installing The Nec Info Center

    Installing the NEC INFO Center To install the NEC INFO Center simply follow the instructions, presented earlier in this chapter, for launching the APPLICATION AND DRIVER CD and installing the software. For the most current version of the NEC Versa DayLite User’s Guide, periodically check the NEC Computers web site at www.neccomp.com.

  • Page 62: Installing The Longrun Utility

    See the section “Transmeta LongRun Utility” for more detailed information on using the utility. To install the LongRun utility, run the NEC Customize utility and select “Install/Uninstall LongRun Utility.” Press the OK button and reboot your system after the installation has completed.

  • Page 63: Uninstalling The Longrun Utility

    Before you remove the utility, close the application by right clicking on the icon in the system tray and choosing “Close LongRun.” Run the NEC Customize utility and select “Install/Uninstall LongRun Utility.” Press the OK button and reboot your system after the uninstall process has completed.

  • Page 64: Product Recovery Cd Options

    The Product Recovery CD and Utility provides you with a number of choices. Move the cursor over each selection on the NEC Product Recovery Utility screen to display a description of the selection in the window at the right side of the screen.
  • Page 65 Check the Product Recovery CD title and make sure that it is the correct CD for your NEC Versa computer and operating system. Power off your system before connecting the external CD-ROM drive to your NEC Versa. Put the CD into the CD-ROM drive tray, close the drive door, and power on your system.

  • Page 66: Partition Only Restore

    Check the Product Recovery CD title and make sure that it is the correct CD for your NEC Versa computer and operating system. Power off your system before connecting the external CD-ROM drive to your NEC Versa. Put the CD into the CD-ROM drive tray, close the drive door, and reboot your computer.

  • Page 67: Installing Windows 2000 Using A Usb Device

    Read the Warning screen. A warning displays indicating that drive C: (the primary drive/partition) is about to be erased and formatted. It may be necessary to reinstall software to the other drives (partitions) to reestablish Start Menu links and other configuration requirements stored on drive C:.

  • Page 68: Installing Windows 2000 Using The Setup Floppy Diskettes

    USB\VID_0644&PID_1000 = “usbstor” Save the txtsetup.sif file back onto the diskette. You have now created setup disks that work with the NEC Versa DayLite USB CD-ROM. Installing Windows 2000 Using the Setup Floppy Diskettes Complete these steps to run the disks you created in the previous procedure.

  • Page 69: Using The System Drives And Bays

    Using the System Drives and Bays External Floppy Diskette Drive External Variable-Speed CD-ROM Drive Hard Disk Drive Memory Modules...

  • Page 70: External Floppy Diskette Drive

    Use the floppy diskette drive to install applications, create a BIOS update diskette, or simply copy files to and from your NEC Versa notebook computer. Connect the drive to one of the USB ports. When connected, the floppy diskette drive is assigned the letter a:.

  • Page 71: Connecting The External Floppy Diskette Drive

    Connecting the External Floppy Diskette Drive Follow these steps to connect the external diskette drive to your NEC Versa system. Locate the external diskette drive and cable that ships with your system. Attach the cable connector to the USB port on the NEC Versa system.
  • Page 72 Release Latch — Use this latch to open the cover of the CD-ROM drive and insert or remove a compact disc. Status LED — Lights green when powered on or connected to the NEC Versa notebook. Flashes green during data read operations. Do not eject the CD or turn off the NEC Versa notebook when the indicator is flashing.
  • Page 73 External CD-ROM drive, right and rear A – CD-ROM Drive Connector CD-ROM Drive Connector — Attach the CD-ROM drive cable to this connector to use the drive with your NEC Versa system. CD-ROM drive cable A – USB Connector B – CD-ROM Cable Connectors USB Cable Connectors —...

  • Page 74: Using The Cd-Rom Drive With Your Nec Versa Notebook

    Using the CD-ROM Drive with your NEC Versa Notebook Follow these steps to connect to and use the external CD-ROM drive with your NEC Versa notebook computer. Power off your NEC Versa notebook. Locate the external CD-ROM drive and cable that ship with your system.
  • Page 75 Slide the release latch toward the front of the CD-ROM drive to open the cover. Opening the CD-ROM drive cover A – Release Latch Put your CD, printed side up, into the circular impression in the drive. Inserting a CD Close the drive cover.

  • Page 76: Using The Usb Cd-Rom Drive To Play Audio Cds

    If the CD is not set to autorun when you insert it in the drive, run the setup.exe file, installation program or follow other instructions provided with the software application to start or load the CD contents. Note Before recording from the external CD-ROM drive to the internal hard disk drive, disable the internal microphone.

  • Page 77: Cd Care

    Chemicals and cleaners can damage the disc. Hard Disk Drive Your NEC Versa notebook comes equipped with an internal fixed 2.5-inch, 9.5mm hard disk drive with a capacity 20 GB , depending on your system configuration.

  • Page 78: Memory Modules

    Memory Modules Your NEC Versa computer comes standard with 64 megabytes (MB) of random access memory (RAM) on the motherboard. You can increase system memory to a maximum of 192 MB with a 128-MB memory module in the memory module bay.
  • Page 79 Remove the screw and bay cover. Removing the screw and bay cover A – Memory Module Bay Cover B – Screw Locate the connectors and alignment notch on the SO-DIMM. Memory module features A – Connectors B – Alignment Notch Using the System Drives and Bays 5-11...
  • Page 80 Locate the memory module expansion port and proceed as follows: Hold the module at a 45-degree angle and align the module contacts with the socket in the system. Push the connector into the socket. Press down on the edge of the module opposite the contacts until the lock tabs on the sides snap into place, securing the module.
  • Page 81 Removing an installed memory module Note The system switches are also located in the memory module bay. Therefore, if you need to set any system switches, you might want to do so while the system is already disassembled. The system switches are defined in Chapter 3. Replace the memory module bay cover and screw.

  • Page 82: Communicating With Your Nec Versa

    Communicating with Your NEC Versa PC Cards Mini PCI LAN Internal Modem Internet Connections IR Port...

  • Page 83: Pc Cards

    PC Cards Your NEC Versa DayLite system is equipped with a PC Card slot that supports Type II PC Cards. PC Cards are all approximately the same size and vary only in thickness. All have a standard 68-pin connector. Your NEC Versa notebook supports the installation of the PC Cards described next.

  • Page 84: Storage Cards

    Storage Cards When you insert a memory or storage card in an NEC notebook computer, it appears as a unique drive as long as the system has an available interrupt for the card. Other Cards Many other kinds of PC Cards are available for notebook computers. They include the following cards: Global Positioning System (GPS) —...

  • Page 85: Inserting A Pc Card

    If all applications using the card are closed, services for that card are shut down. You receive a message saying that it is safe to remove the card. Press the button on the side of the PC Card in the slot. 6-4 Communicating with Your NEC Versa...

  • Page 86: Mini Pci Lan

    Mini PCI LAN Your NEC Versa system may ship with an internal Mini PCI LAN that allows you to connect your system to a local area network. The internal LAN is a 10/100Base-TX interface that supports both Wake on LAN and Network Boot functions.

  • Page 87: Internal Modem

    Internal Modem Your NEC Versa system ships with a V.90 internal modem that allows you to connect to the Internet, send a fax, or access your email. Note When using a modem outside the U.S. and Canada, you might need an international telephone adapter, available at most electronics supply stores.

  • Page 88: Internet Connections

    SMTP server (for outgoing mail) IR Port The IR (infrared communication) port on the front of your system lets your NEC Versa DayLite/UltraLite computer communicate with other devices that also use infrared technology. The IR port is Infrared Data Association (IrDA) compatible. You can easily transfer files between your NEC Versa notebook and an IR-equipped desktop, or print to an IR-equipped printer without using cables.

  • Page 89: Enabling/Disabling The Ir Port In Windows 2000

    Enabling/Disabling the IR Port in Windows 2000 The IR port on your NEC Versa notebook ships set to off. When the IR port is enabled in BIOS, an icon appears on the taskbar and provides access to the system’s infrared utility.
  • Page 90 Position the NEC Versa notebook no more than three feet away from the IR peripheral device you are using. Make sure that there is no greater than a 30º angle between the computer and the device. Communicating with Your NEC Versa 6-9...

  • Page 91: Traveling Tips

    Traveling Tips Preparing for Travel Packing for Travel Using Power Connections Getting Through Customs Connecting to the Internet...

  • Page 92: Preparing For Travel

    AT&T’s Worldwide Calling Guide. (For more information, see the section later in this chapter, “Using Your Modem.”) Packing for Travel The following are what you should take with you when you travel with your NEC Versa. Extra fully charged batteries...

  • Page 93: Using Power Connections

    The United States, Canada, and most of Central and South America use 120-volt alternating current (AC). Most other countries of the world use 240-volt AC. The NEC Versa adapts to voltages ranging from 100 to 240 volts.

  • Page 94: Connecting To The Internet

    To avoid hassle when moving your system through customs, you may want to obtain a certificate of registration and carry it whenever you travel out of the country with your NEC Versa notebook computer. Connecting to the Internet Whether you are on a business trip or vacation, connecting to the Internet while you travel can be expensive and frustrating unless you are prepared.
  • Page 95 Many hotels can provide a LAN cable by prearrangement, so you can travel with a minimum of accessories. Plug the LAN cable into your system and the LAN connector in the room or hall where you want to access the Internet. After connecting the LAN cable, connect your system to an AC power outlet (if desired) and power on your system.

  • Page 96: Using Peripheral Devices

    Using Peripheral Devices External Monitor External Audio Options USB Devices...

  • Page 97: External Monitor

    External Monitor You can add a standard external monitor to your NEC Versa DayLite system using a display signal cable (usually provided with the monitor) and a monitor transfer cable. Follow these steps to connect an external monitor to your NEC Versa notebook.

  • Page 98: External Audio Options

    Connect audio jacks, like a microphone, headphones, or external speakers to the audio ports as follows. Locate the audio port that you want to use. Plug the jack into the appropriate port on the right side of the NEC Versa notebook. Audio ports A –...

  • Page 99: Usb Devices

    USB Devices Your NEC Versa system is equipped with two USB ports that increase your connectivity choices. The USB ports on your system allow you to connect other USB- equipped peripheral devices per port to your NEC Versa notebook computer. These peripherals may include a digital camera, scanner, printer, CD-ROM drive, modem, mouse, keyboard, telephone, or game device.

  • Page 100: Using Multimedia

    Using Multimedia Audio Video Multimedia Applications...

  • Page 101: Audio

    CDs must be digitized before being recorded and stored on disk. You can make microphone level recordings on your NEC Versa computer using the internal microphone or an external microphone plugged into the microphone jack on the front of the system.

  • Page 102: Microphone

    Microphone You can capture and record sounds through the internal microphone on the NEC Versa or through an external microphone that connects to the system through the microphone port. You can record voice-overs for narration, reminders, or special instructions. See “Recording,”...

  • Page 103: Using Headphones

    (available at an electronics supply store) plug in through the headphone jack located on the front of the NEC Versa notebook. Adjust the volume using the function keys or through the software using the sound horn on the taskbar.

  • Page 104: Video

    The NEC Versa DayLite SVGA has a high-resolution capability of 800 x 600 pixels. Use the Windows Media Player on your NEC Versa notebook to run full motion, full- screen MPEG video. For details about using the Windows Media Player, refer to the section earlier in this chapter, “Playing Back.”...

  • Page 105: Solving System Problems

    Solving System Problems Problem Checklist Start-Up Problems If You Need Assistance...

  • Page 106: Problem Checklist

    Problem Checklist First check the items in the following list. If these items don't help, see the table that follows the list. Power is on to the computer. The electrical outlet to which your AC adapter is connected is working. Test the outlet by plugging in a lamp or other electrical device.

  • Page 107: Start-Up Problems

    Setup utility to set current system parameters. Note When the NEC Versa detects an error related to display devices, it cannot display on either the LCD or a CRT. The system warns you by beeping. Solving System Problems 10-3...

  • Page 108: Post Error Messages

    Post Error Messages The NEC Versa computer has a built-in checking program that automatically tests its components when you turn the system power on. This diagnostic test is called the Power-On Self-Test (POST). If the system finds a problem during the POST, the system displays an error message or emits a series of beep signals.
  • Page 109 Error in the DMA controller. Contact your NEC Computers service representative to replace the CMOS battery. DMA#1 Error Error in the first DMA channel. Contact your NEC Computers service representative for service. DMA#2 Error Error in the second DMA channel. Contact your NEC Computers service representative for service.

  • Page 110: Beep Codes

    Post Error Messages Message Resolution Off Board Parity Error Parity error in an expansion slot. Contact your NEC Computers service representative to be sure that the memory module is installed correctly. The error format is: OFF BOARD PARITY ERROR ADDR(HEX) = (XXXX) XXXX is the hex address where the error occurred.

  • Page 111: If You Need Assistance

    NEC Computers. Note If you purchased and are using this product outside the U.S. or Canada, please contact the local NEC Computers office or their dealers for the support and service available in your country. Solving System Problems 10-7...

  • Page 112: Getting Service And Support

    Getting Service and Support Service and Support Contact Information Web Site FTP Site Support Services Email/Fax to Support Services...

  • Page 113: Service And Support Contact Information

    Not only do these services provide information about your NEC system, they can also be used to answer your questions and help solve any problems you may have with your system, should that ever be necessary.

  • Page 114: Web Site

    Web Site If you have a modem or are connected to a network, you can access the NEC Computers web site. You can do this through a commercial online service or through your Internet account. The web site contains general information about NEC Computers and its products, press releases, reviews, a reseller locator, and service and support information.

  • Page 115: Support Services

    NEC office or dealer for the support and service available in their country.) Direct assistance is available 24 hours a day, 7 days a week. Call the NEC Computers Support Services, toll free, at (U.S. and Canada only) for the following 800-632-4525 support and to find out about the extended service programs available for purchase.

  • Page 116: Setting Up A Healthy Work Environment

    Setting Up a Healthy Work Environment Making Your Computer Work for You Arrange Your Equipment Adjust Your Chair Adjust Your Input Devices Adjust Your Screen or Monitor Vary Your Workday Pre-Existing Conditions and Psychosocial Factors...

  • Page 117: Making Your Computer Work For You

    Making Your Computer Work for You Computers are everywhere. More and more people sit at computers for longer periods of time. This appendix explains how to set up your computer to fit your physical needs. This information is based on ergonomics - the science of making the workplace fit the needs of the worker.

  • Page 118: Arrange Your Equipment

    Arrange Your Equipment Arrange your equipment so that you can work in a natural and relaxed position. Place items that you use frequently within easy reach. Adjust your workstation setup to the proper height (as described in this appendix) by lowering the table or stand that holds your computer equipment or raising the seat height of your chair.

  • Page 119: Adjust Your Screen Or Monitor

    If you use a mouse, position it at the same height as the keyboard and next to the keyboard. Keep your wrists straight and use your entire arm when moving a mouse. Do not grasp the mouse tightly. Grasp the mouse lightly and loosely. Adjust the keyboard height so that your elbows are near your body and your forearms are parallel to the floor, with your forearms resting on either armrests or forearm supports, in the manner described previously.

  • Page 120: Vary Your Workday

    Adjust the screen or external monitor's brightness and contrast controls to enhance readability. Use a document holder placed close to the screen or external monitor. Position whatever you are looking at most of the time (the screen or reference material) directly in front of you to minimize turning your head while you are typing.
  • Page 121 Contact a doctor if you experience pain, tenderness, swelling, burning, cramping, stiffness, throbbing, weakness, soreness, tingling and/or numbness in the hands, wrists, arms, shoulders, neck, back, and/or legs. This appendix was prepared in consultation with Dr. David Rempel of the University of California/San Francisco Ergonomics Program and Mr.

  • Page 122: Specifications

    Specifications System Components Memory Map Interrupt Controllers...

  • Page 123: System Components

    System Components The following system component specifications are standard except where noted. Note The components that ship with the system are subject to change without notice. System Processor 600-MHz Transmeta Crusoe TM5600 microprocessor Architecture 64-bit Peripheral Component Interconnect (PCI) Random Access Memory Standard Main Memory —...
  • Page 124 Input/Output (I/O) Facilities Integrated industry-standard interfaces Infrared — 1 FIR VGA — 1 port, 20-pin (via CRT cable) Mono microphone — 1 port, 3-pin, Mini Pin Jack Stereo Headphones — 1 port, stereo 3-pin, Mini Pin Jack DC In — 1 port, for AC adapter cable USB ports —...
  • Page 125 Keyboard Membrane 86 keys with country-specific QWERTY-key layout Function keys — 12 keys Cursor Control keys — 8 functions on 5 keys; arrow keys arranged in inverted T layout Numeric keypad — embedded Fn key — function key for ROM-based key functions Stroke —...
  • Page 126 24X-Maximum/10X Minimum Variable Speed CD-ROM Drive Type — 5-inch CD-ROM Pack Average Data Transfer Rates — 1545 KB/second to 3600 KB/second Burst Transfer Rate — 16.7 MB/second, PIO mode4/DMA mode Average Access Time — 190 ms (Random) — 350 ms (Fullstroke) Photo CD Compatibility —...
  • Page 127 Dimensions Width — 10.4 in. (264 mm) Depth — 8.3 in. (211 mm) Height — 1.06 in. (27 mm) Weight 3.3 lb. (1.39 kg) — without external drives Recommended Environment Operation Temperature — 41°F to 95°F (5°C to 35°C) Relative Humidity — 20% to 80% (Noncondensing) Storage Temperature —...

  • Page 128: Memory Map

    Memory Map The system supports system and video shadowing, both controlled through complementary metal oxide semiconductor (CMOS). The system supports BIOS as a cacheable area with write protection. The following table shows the system's memory map. System Memory Map Memory Space Size Function FFFE 0000H-FFFF FFFFH...

  • Page 129: Interrupt Controllers

    Interrupt Controllers Using interrupts, hardware can request software services. If non-Plug and Play software is being used, the interrupt may need to be moved for software application or driver compatibility. Some interrupts cannot be moved. Fifteen interrupts can be used with a cascade connection of 8259INTC x 2.

  • Page 130: Frequently Asked Questions

    Frequently Asked Questions External Mouse Display PC Cards Diskette Drive Booting Power Management Miscellaneous...

  • Page 131: External Mouse

    How can a mouse and an external keyboard be connected to the notebook at the same time? The NEC Versa DayLite is equipped with two USB ports that allow you to connect any combination of two USB devices, at the same time. If you purchase a USB mouse and a USB keyboard, simply plug each device into any of the USB ports on your system.

  • Page 132: Pc Cards

    In Setup, I disabled or reconfigured peripheral devices (like the ports or sound), yet I am unable to use the freed IRQs or I/O address resources with my PC Cards. Why? To provide a stable platform free of conflicts, NEC Computers excluded some resources from PC Card use. Diskette Drive...
  • Page 133 Enter. What type of diskette do I use in my diskette drive? Your NEC Versa DayLite ships with an external 1.44-MB USB diskette drive that uses 3.5-inch high density (HD) diskettes. These diskettes are also called double-sided, high-density (DSHD) diskettes.

  • Page 134: Booting

    Booting What is the difference between a warm boot and a cold boot? A warm boot restarts the system while system power is on. A warm boot is also a software reset. A warm boot clears volatile system memory and reloads the operating system.
  • Page 135 What is the purpose of Suspend to RAM (Standby)? You can initiate full Suspend-to-RAM by accessing Start, Shut Down, Standby. This places the system in a deeper state of “sleep” and requires that you slide the Power button forward to resume operation. Putting your system into Standby initiates the Standby power-saving mode and is a convenient way of conserving energy when you are going to be away from your system for a short period of time.

  • Page 136: Miscellaneous

    What is a time-out? A time-out is the amount of time your system or a particular component is inactive. Miscellaneous How do I set the time and date? You can change the time and date in Windows 2000 as follows. Double click the time in the lower right corner of the screen.
  • Page 137 Why do I get a message “Insufficient memory” when I run some games? I have 64 MB of memory. The “Insufficient memory” refers to the 640 kilobytes of (DOS) base memory. Since there are drivers being loaded at power on, the amount of memory can be lower than the game requires.
  • Page 138 I'm having a problem using the IR port. What can I do? Use the taskbar icon to enable the IR port. Next, enter the BIOS Setup utility to verify that the IR serial port setting contains an available COM port and IRQ setting.

  • Page 139: Glossary

    Glossary AC adapter A device that connects an NEC Versa notebook computer and an AC wall outlet to provide AC power for running the system and recharging the battery. A/D conversion The process of converting an analog signal into a digital signal.
  • Page 140 bits per second (bps) A unit of transmission. Also called baud rate. board Printed circuit board (PCB). Board on which computer components are soldered and thin wires are printed to connect the components. boot To start up a computer. See cold boot and warm boot. An electronic circuit within a computer used for transmitting data or electrical power from one device to another.
  • Page 141 CMOS Complementary Metal Oxide Semiconductor. A chip that contains nonvolatile memory in the NEC Versa notebook. CMOS is backed up by an internal battery that preserves clock/calendar data and system configuration parameters stored in CMOS. cold boot Process of starting up the computer by turning on the power. If power is already on, the process means to turn off the computer and turn it on again.
  • Page 142 extended RAM The area of RAM above the first megabyte of memory in the system available for enhancing system performance. Fast Infrared, an infrared technology that sends data at 4.0 Mbit/second (4 million bits per second). FM synthesis A technique for synthesizing sound that uses a combination of modulated sine waves to produce different waveforms.
  • Page 143 Technology that uses infrared waves to communicate data between the IR-equipped devices without the use of cables. The IR port on the NEC Versa is Infrared Data Association (IrDA) compatible. interface A connection that enables two devices to communicate.
  • Page 144 Musical Instrument Digital Interface. A standard serial bus, digital interface designed to connect electronic musical devices. MIDI has no innate sound of its own. mode A method of operation; for example, the NEC Versa operates in either normal or power-saving modes. modem MOdulator-DEModulator.
  • Page 145 page A type of message transmission in which a message is sent or received via modem to a paging device from a computer (with paging communications software) or telephone. parallel interface Interface that communicates multiple data bits at a time. parallel printer A printer with a parallel interface.
  • Page 146 prompt A special symbol indicating the beginning of an input line. Also a message that appears on the screen indicating that the user must take a certain action. QWERTY The QWERTY keyboard, designed in the 1800s for mechanical typewriters, refers to the first six keys (QWERTY) on the top row of letters on the standard keyboard.
  • Page 147 VersaGlide A small, touch-sensitive pad used as a pointing device on your NEC Versa notebook computer. With the VersaGlide, you can move your finger along the pad to move the cursor or simulate a mouse click by tapping the pad.
  • Page 148 Video Graphics Array. Graphics technology that supports up to 256 colors and a graphics resolution of 640 by 480 pixels. volatile memory Storage media that loses its data when system power is turned off. Standard memory and memory that you add to the Versa are volatile memory. See nonvolatile memory. warm boot Process of resetting the computer without turning off the power through keyboard input (pressing Ctrl, Alt, and Del keys simultaneously).

  • Page 149: Index

    Application and Driver CD, 4-5 connecting, 5-6 dialog box, 4-6 using, 5-6 installing, 4-6 Charging the battery, 2-11 launching, 4-5 Cleaning your NEC Versa, 2-14 Audio Closing LCD panel, 3-15 AVI files, 9-2 CMOS battery, 2-12 MIDI files, 9-2 Connecting...
  • Page 150 Diskette drive, 5-2 Internet cable, 5-2 Connection Wizard, 6-7 connecting, 5-3 connections, 6-7 disconnecting, 5-3, 5-8 Interrupt controllers, B-8 IR port, 1-8 using, 6-9 Entering BIOS setup, 3-2 Extending battery life, 2-8 External devices Keyboard, 1-5, 1-6 audio options, 8-3 CD-ROM drive, 5-3 diskette drive, 5-2 LCD panel...
  • Page 151 2-3 FTP site, 11-3 status LED, 1-8 support services, 11-4 Power button web site, 11-3 pressing, 3-15 NEC INFO Center, 4-7 Power connections, 7-3 installing, 4-7 Power management, 3-12 uninstalling, 4-7 Power options Num lock, 1-5 Windows 2000, 3-12...
  • Page 152 3-3 Using Show icon on taskbar, 3-15 AC adapter, 2-3 SO-DIMMs animation files, 9-5 features, 5-11 main battery, 2-6 installing, 5-12 NEC VersaGlide, 2-2 removing, 5-12 Speaker, 1-5 Specifications Vents, 1-12 battery pack, B-5 VersaGlide calendar clock, B-2 adjustments, 2-3...

  • Page 153: Regulatory Statements

    Regulatory Statements The following regulatory statements include the Federal Communications Commission (FCC) Radio Frequency Interference Statement, compliance statements for Canada and Europe, battery disposal and replacement information, and the Declaration of Conformity. FCC Statement for United States Only Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

  • Page 154: European Community Directive Conformance Statement

    Battery Replacement A lithium battery in some computers maintains system configuration information. In the event that the battery fails to maintain system configuration information, NEC Computers recommends that you replace the battery. For battery replacement information, call your NEC Computers dealer or NEC Support Services.

  • Page 155: Declaration Of Conformity

    NEC Computers Inc. DECLARATION OF CONFORMITY We, the Responsible Party NEC Computers Inc. 15 Business Park Way Sacramento, CA 95828 declare that the product ® ™ NEC Versa DayLite is in conformity with part 15 of the FCC Rules. Operation of this product is subject...

Table of Contents