Celeron/Pentium Ii Removal - NEC Versa Note VX Series Service And Reference Manual

Main Board
Follow these steps to remove the main board.
Remove the LCD panel, keyboard, heat plate, top cover, audio board, I/O board, diskette
1.
drive, and Kensington lock latch from the system.
Locate and remove the four screws that secure the main board to the base assembly. Use the
2.
needle-nose pliers to remove the three hex screws.
A – Hex Screws
B – Screw
Lift the main board out of the base assembly.
3.

Celeron/Pentium II Removal

Follow these steps to remove the
Celeron/Pentium II CPU.
1. Remove the LCD panel, keyboard, heat plate, top cover, audio board, I/O board, diskette
drive, Kensington lock latch, and main board from the system.
3-20 Disassembly and Reassembly
Removing the main board screws
C – Main Board