Resetting Disks To Non-Raid - Lenovo ThinkStation P300 Hardware Maintenance Manual

Resetting disks to non-RAID

This section describes how to reset your hard disk drives to non-RAID.
To reset your hard disk drives to non-RAID, do the following:
1. Press Ctrl+I when prompted to enter the Intel Matrix Storage Manager option ROM configuration utility
during the computer startup.
2. Use the up and down arrow keys to select Reset Disks to Non-RAID and press Enter.
3. Use the arrow keys and the space key to mark individual physical hard disk drives to be reset, and then
press Enter to complete the selection.
4. When prompted, press Y to confirm the reset action.
5. After completing the Reset Disks to Non-RAID function, you can:
• See "Deleting RAID volumes" on page 59 for RAID volume deletion.
• See "Creating RAID volumes" on page 59 for RAID volume creation.
• Use the up and down arrow keys to select Exit and press Enter.
60
ThinkStation P300 Hardware Maintenance Manual