Lenovo ThinkStation P300 Hardware Maintenance Manual page 181

2. If you are replacing an old hard disk drive, remove the four screws that secure the hard disk drive. Then,
slide the hard disk drive out of the rear of the 5.25-inch cage assembly.
Figure 160. Removing the hard disk drive from the 5.25-inch cage assembly
3. To install a new hard disk drive, slide the new hard disk drive into the 5.25-inch cage assembly from
the rear of the 5.25-inch cage assembly. Then install the four screws to secure the new hard disk
drive in the 5.25-inch cage assembly.
Figure 161. Installing the hard disk drive in the 5.25-inch cage assembly
What to do next:
• To work with another piece of hardware, go to the appropriate section.
• To complete the installation or replacement, go to "Completing the parts replacement" on page 223.
.
Chapter 8 Replacing FRUs
175