Table of Contents
Advertisement
4.1. REPLACING INK CASSETTES
Read the following for information on when and how to replace ink cassettes.
(1) Replacement time
Replace ink cassettes under the following conditions.
a. The ink remaining in the ink cassette is low.
•
The following message is displayed on the operation panel.
•
Printing operation is continued.
•
Prepare new ink cassettes before they are totally empty.
b. The ink cassette becomes empty.
•
The following message is displayed on the operation panel.
•
Printing operation stops.
•
Replace with a new ink cassette as soon as possible.
Notes :
•
(2) Replacement procedure
Follow the steps below to replace ink cassettes.
Caution :
•
•
Do not shake ink cassettes. Doing so may cause ink to leak out.
Mutoh's DT-Series Printers – Operation Instructions
4. DAILY MAINTENANCE
Ready to Print
Heaters
Cut&Feed
→ NearEnd
InkStatus
No Ink [123]
When the ink runs out or is low, the ink colour is indicated as follows:
•
1-8: The number of the ink cassette slot (Refer to 'Installing ink cassettes')
•
All: All inks
When handling ink cassettes, be careful that ink does not get in your eyes or on
your skin. However, if this happens, flush immediately with water.
Otherwise, your eyes may become congested or slightly inflamed. If you feel
discomfort, consult a doctor immediately.
Do not disassemble ink cassettes. Otherwise, ink may get in your eyes or on your
skin.
Cleaning
LeverUp
[1]
71
AP-75171, Rev. 1.1, 25/06/04
Advertisement
Table of Contents
