Support Software Problems; Battery Replacement - Procom BST1M Series User Manual

5
BST1M Series User's Manual
54

Support Software Problems

There is a variety of software on the Support Disk. If
you install the wrong software, the motherboard and
the system may not operate properly.
Make sure you check the following:
•
VGA driver: You must install the correct driver
for the operating System you are using.
•
Audio driver: Check that you have installed the
correct driver. Do not install anything from the
Audio section of the main menu. Only install
from the Audio Driver section of the SiS 630
driver software.

Battery Replacement

This motherboard uses a CR2032 Lithium coin bat-
tery to maintain the system configuration record cre-
ated by the BIOS CMOS Setup Utility. The battery
should last for several tears. If the battery fails, the
system will not be able to retain the system settings
and will not operate properly. If this happens, do as
follows:
•
Turn off and unplug the system.
•
Open the system and locate the battery on the
motherboard.
•
Remove the old battery and dispose of it prop-
erly.
•
Install the replacement battery with the positive
side (marked with a + sign) face up.
•
Reassemble the system and reload the Optimized
Defaults in the CMOS Setup Utility.