Disk Drive Connections - Procom BST1M Series User Manual

2
Configuration & Installation
Connecting ATX Power
The power connector from the ATX power supply is
a rectangular plastic connector with multiple wires
running back to the power supply. It plugs onto the
ATX power connector on the motherboard. The con-
nector will only plug on one way, so if it won't plug
on easily, turn it around and try again. Make sure the
power supply is unplugged when you connect the
power lead.
Connecting Cooling Fans
There are two connectors on the motherboard for
connecting power leads from system cooling fans
mounted in the system housing. The system housing
may already have such a fan installed. If so, you
should connect it to the nearest connector on the
motherboard. Many cases have a space to install a
standard cooling fan. The fan power leads will only
plug on one way so you can't connect them incor-
rectly.
+5V GND
Fan Out

Disk Drive Connections

This motherboard has three connectors for disk
drives, one for up to two floppy disk drives and two
EIDE connectors which can connect to two IDE de-
vices each for a total of four. The motherboard co-
mes with two ribbon connector cables, one floppy
cable and one IDE cable.
21