Table of Contents
Advertisement
What's In This
Chapter:
Hardware Configu-
ration
Installing the
Motherboard
Installing Support
Software
Configuration & Installation
Configuration & Installation
This chapter explains how to configure the mother-
board, install a CPU and system memory and has
basic information on installing the motherboard in a
system housing or "chassis". We then explain how to
install the support software that comes on the Sup-
port Disk. If the board is already installed in a sys-
tem, you may want to review this chapter or you can
skip it and go to the next chapter which covers some
post-installation topics.
Hardware Configuration
There are three steps to configure the motherboard
hardware before installing it in a system housing:
configuring the jumper switches, installing a CPU
and installing system memory.
Configuring The Jumpers
This motherboard has three jumper switches. All the
jumpers come preset to the default settings. You may
not need to change any of the settings. Please note
that once the motherboard is installed, you should
always turn your computer off and disconnect the
power cord before changing any jumper settings. In
all cases, you should always take precautions against
static electric damage to sensitive components. The
default settings are listed in the following table.
2
9
Advertisement
Table of Contents
