Installing A Cpu - Procom BST1M Series User Manual

BST1M Series User's Manual
Please Note:
The pictures in
this section are
generic and are
not of the moth-
erboard this
manual is about.
12

Installing A CPU

You can install an Intel PPGA or FC-PGA CPU in
the motherboard's Socket 370. If you purchased a
CPU packaged by Intel, follow the installation in-
structions that come with it. In any case please re-
view the following generic instructions which are the
same for both CPU types. Make sure you take pre-
cautions against static electric damage to the CPU.
1. The CPU will only fit into the socket in one ori-
entation. Look at the top of the CPU with and
note the two angled corners where some pins are
missing. On the other two corners the pins form
º angle.
a 90
2. Locate the PGA370 socket on the motherboard
and identify the socket's Pin 1 position at the end
of the socket actuating lever (or "handle"). Note
the angled corners of the pin receptacles on that
side of the socket.
CPU
Pin 1 side
370 Socket
Pin 1
Pin 1