Power Management Setup; Acpi Function - Procom BST1M Series User Manual

5
BST1M Series User's Manual
48

Power Management Setup

Enable ACPI and or customize settings here. You set
power management options for any OS that doesn't
support OS power management here. You can also
configure Power Management Wake Up events and
set the system to wake-up at a specific time and/or
date.
The item options for setting up power management
for non-ACPI compliant Operating Systems are ex-
plained below.

ACPI function

Default: Enabled
When Enabled, an ACPI OS controls power man-
agement. Disabled allows manual settings.
Video Off Option
Default: Susp,Stby - > Off
Sets in which modes the display gets turned off. The
default is Suspend and Standby modes.
Video Off Method
Default: DPMS
This determines the manner in which the monitor is
blanked.
V/H SYNC+ Blank: This selection will cause the
system to turn off the vertical and horizontal sync.
ports and write blanks to the video buffer.
Blank: This option only writes blanks to the
screen video buffer.
DPMS: Initial display power management signaling
so that OS can control the display.
MODEM Use IRQ
Default: 3
This item tells the system which IRQ the modem is
using.