Upgrading System Memory - Procom BST1M Series User Manual

3
BST1M Series User's Manual
40

Upgrading System Memory

There is a full explanation of how to install system
memory in Chapter 2. Please refer to it if you need
information on the installation procedure. This
motherboard uses 3.3V unbuffered SDRAM 168-pin
DIMMs with SPD. It requires at least PC100
SDRAM modules. It can also use PC133 DIMMs.
The system will automatically detect the memory
clock speed and the speed can be different from the
external clock frequency used by the CPU.
If both sockets are occupied, you will need to re-
move one or both modules to in stall an upgrade. If
you're only removing one module, always remove
the one with the smaller capacity.