Pc Health Status; Setting A Password - Procom BST1M Series User Manual

5
BST1M Series User's Manual
50
When this is Enabled, the two lines below it will be-
come active. Date (of Month) Alarm and Time
(hh:mm:ss) Alarm allow you to set the date and/or
time when the system will wake up.
PnP/PCI Configurations
We recommend not changing the defaults. The VGA
IRQ item auto-assigns an IRQ for both the onboard
and a PCI display card that requires an one (most
don't).

PC Health Status

You can set the CPU warning and shutdown tem-
peratures here or use the defaults.
Frequency/Voltage Control
Normal use requires no changes to the defaults. You
set some options manually, but we don't recommend
changing these settings unless you know what you
are doing. Some settings could result in shortening
the life of or damaging the CPU and could lead to
CPU failure.

Setting a Password

You can install a system Password. The password
prevents access to the CMOS Setup Utility.