1 Motherboard Features - Procom BST1M Series User Manual

1
Motherboard Features
The embedded 64-bit video display supports both 2D
and 3D display graphics. It is AGP 2.0 compliant
and runs up to 133MHz. The display circuitry uses a
shared memory architecture that allows a maximum
of 64MB of main memory to act as a frame buffer.
The video controller also supports hardware DVD
acceleration and direct DVD to TV playback.
Display drivers are supplied on the Support Disk that
comes with the motherboard.
Onboard 32-bit Audio
The SiS 630 chipset onboard audio comes with audio
drivers that are supplied on the Support Disk. The
audio subsystem uses the Line-In, Mic and Line-Out
jacks on the audio port to connect to external devices
and also uses either of the onboard CD-ROM audio-
in connectors to process audio from a CD-ROM
drive.
The onboard audio uses an AC'97 audio CODEC.
This reduces noise to improve audio quality and per-
formance and also improves voice synthesis and rec-
ognition.
Expansion Options
This motherboard has two 32-bit Revision 2.2 PCI
expansion slots for PCI expansion cards. Both slots
are Bus Master capable.
The motherboard's MR slot supports a Modem Riser
card that has data/fax modem and other telephony
features.
The onboard ADIMM slot can support a DS-301
multi-display card, or an optional display memory
module. But this slot is available on BST1M only.
Such cards above are available as a separate pur-
chase. Ask your motherboard vendor for details.
5