SECTION 2
DRIVING YOUR MOTOR HOME
slideout room to push the room in toward the
coach until it is snug against the main coach
sidewall.
•
NOTE: Use some type of rigid, padded
material to protect the sidewall from punc-
tures, dents or other damage to the finish
from any device or equipment used to press
the sidewall in.
•
Pressure must be applied evenly to avoid
binding of the hydraulic mechanism. It may
take about 10 minutes to press the room
extension inward completely.
•
When the room is snug against the coach
wall, close the hydraulic line valves to pre-
vent "creep out" during transit.
•
See an authorized Winnebago Industries
dealer for service of the slideout control sys-
tem.
2-24