Replacing Psu Riser Card - Fujitsu PRIMERGY RX300 S5 Service Supplement Manual

Replacement routines
4.5

Replacing PSU riser card

Ê Open the server as described in the
page 17.
Ê Disconnect the power connectors.
Ê Remove the power supply cage as discribe the Options Guide PRIMERGY
RX300 S5 in chapter „Preparation").
Figure 14: Removing the PSU riser card bracke
Ê Remove one screw from the PSU riser card bracket (1).
Ê Remove the PSU riser card bracket (2).
RX300 S5
section "Opening the server" on
Service Supplement
Replacing PSU riser card
1
2
29