Fujitsu PRIMERGY RX300 S5 Service Supplement Manual page 28

Replacing the fan box backplane
Figure 12: Removing the fan box backplane
Ê Press down the locking latch (1) of thefan box backplane
Ê Push the fan box backplane in the direction fo the arrow (2) and push it so
out of the lockings.
Figure 13: Installing the Power Backplane entfernen
Ê Insert the new fan box backplane.
Ê Push the fan box backplane in the direction of the arrow until it is engaged
again.
Ê Insert the screw. Fasten the screw with a torque of 0.35 Nm.
28
2
Service Supplement
Replacement routines
1
RX300 S5