Replacing USB module
4.3
Replacing USB module
Ê Open the server as described in the
page
17.
Ê Remove the fan box (see Options Guide PRIMERGY RX300 S5 in chapter
„preparation").
Ê Remove the Fan box holder on the right side behind the front panel frame.
Description see
Figure 8: Unlock the front panel frame
Ê Press the locking handle upward (1).
Ê Push the front panel frame inward (2).
24
section "Removing fan box holder" on page
1
Service Supplement
Replacement routines
section "Opening the server" on
2
17.
RX300 S5