Canon Laser Shot LPB3500 User Manual page 40

1
Make sure that the printer and computer are OFF.
2
Connect the B-type (square) end of the USB cable to the USB
connector on the rear side of the printer.
3
Connect the A-type (flat) end of the USB cable to the USB port
on the computer.
NOTE
If a Wizard appears after connecting the USB cable by the Plug and Play automatic
setup, install the software for this printer using either one of the following
procedures. For more details, see "Installing the CAPT Software," on p. 3-4.
- Click [Cancel] and install the software from CD-ROM Setup.
- Install with Plug and Play.
Connecting to a Computer
1
1-15