Canon Laser Shot LPB3500 User Manual page 360

8
When installing the printer unit on the paper feeder, gently set
it down so that each surface of the printer unit is flush with
the front or side surfaces of the paper feeder.
Also, match the positioning pins (A) and connector (B) when setting the printer
unit.
(A)
IMPORTANT
If the printer unit cannot be placed on the paper feeder properly, lift the printer
once, hold it horizontally, and place it again. If you try to set the printer forcefully
without lifting it, the connector and positioning pins may be broken.
9
Set the paper cassette in the printer unit and paper feeder.
NOTE
If the optional duplex unit was previously installed, reinstall it on the printer. For
details on the procedure for installing the duplex unit, see "Installing the Duplex
Unit," on p. 6-24.
10
Connect the interface cables except for the USB cable, and
connect the power cord.
11
Plug the power plug into the AC power outlet.
12
Connect the USB cable.
IMPORTANT
Be sure to turn the printer ON once when loading paper in the paper cassette for
the first time after installing the paper feeder.
(B)
(A)
Paper Feeder
6
6-19