Canon Laser Shot LPB3500 User Manual page 362

1
Turn the printer and computer OFF, remove the USB cable,
and then disconnect the power plug from the AC power outlet.
2
Remove all the interface cables and the power cord from the
printer.
NOTE
If the optional duplex unit is installed, remove it from the printer. For details on the
procedure for removing the duplex unit, see "Removing the Duplex Unit," on p. 6-28.
3
Pull out the paper cassettes from the printer unit and paper
feeder.
4
Remove the cassette protective cover.
5
Lift the printer and remove it from the paper feeder.
6
Move the paper feeder.
7
Move back the printer unit to the installation site.
8
Set the paper cassette in the printer.
NOTE
If the optional duplex unit was previously installed, reinstall it on the printer. For
details on the procedure for installing the duplex unit, see "Installing the Duplex
Unit," on p. 6-24.
9
Connect the interface cables except for the USB cable, and
connect the power cord.
10
Plug the power plug into the AC power outlet.
11
Connect the USB cable.
Paper Feeder 6-21
6