Advertisement
HP Fax 1200 Series Setup Poster
9
Insert color print cartridge
Remove the color print cartridge (wider
a
one) from its packaging and, being careful
to touch only the black plastic, gently
remove both the green pull tab and the
blue tape covering the nozzles.
CAUTION:
CAUTION:
Do not touch
Do not touch
or remove
or remove
the gold-
the gold-
colored
colored
contacts.
contacts.
11
.
Print an alignment page
Make sure paper is
loaded in your HP Fax.
The message "Press
ENTER to Align
Cartridges" appears in
the display. Press the
ENTER key to enable
the HP Fax to perform
the alignment. After a
page prints, the
alignment is complete.
13
.
You can now copy and fax with your new HP Fax
Look in the Basic
Guide for
information on how
to get started using
your HP Fax.
Copyright Hewlett-Packard Company 2000.
Printed in the USA, Germany, or Singapore.
Push the color print cartridge firmly down into
b
the slot on the left. Lower the left print-cartridge
latch down onto the top of the cartridge, and
push down until the latch locks firmly into place.
Close the top cover.
ENTER
.
Recycle or discard the alignment
page.
Side 2 of 2
10
.
Select your country and language
a
If prompted on the
Keypad
display, enter the code
for your country on the
keypad, and then
confirm your selection.
b
If prompted, enter the code
for your language on the
keypad, and then confirm
your selection.
12
Set up faxing
Keypad
Menu
Display
In the U.S., you must enter your name and fax number.
a
To enter the date, press Menu, then 5, and then 1. Use the keypad to enter the
date. When the correct number appears, press the right arrow key to move to the
next position. For the year, enter the last two digits. After you are finished, press
ENTER.
b
To enter your name and fax number, press Menu, then 5, and then 2.
Use the keypad to enter your fax header information.
ABC
Each number corresponds to both upper and lower case letters. For example, if
2
your name is Brian, press the 2 key three times for an uppercase B. When the
correct letter appears, press the right arrow key. After you are finished, press
ENTER. Enter the fax number, and then press ENTER.
Refer to the Basic Guide for information on other fax settings.
For troubleshooting, refer to the
HP Fax 1200 Series: Your Basic Guide.
Save this
poster for future reference.
Advertisement
