Internal base enclosure (HP EliteBook 755 models)
Description
Internal base enclosure for use only on HP EliteBook 755 models (includes RJ-45 door with
spring)
Before removing the internal base enclosure, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the following components:
a.
Service door (see
b.
Battery (see
c.
Keyboard (see
Use the following image as an overview of all base enclosure screw locations.
Remove the internal base enclosure:
1.
Position the computer upside down.
Service door on page
Battery on page
46)
Keyboard on page
55)
44)
Component replacement procedures
Spare part number
779688-001
67