Internal Base Enclosure; Internal Base Enclosure (Hp Elitebook 745 Models) - HP EliteBook 745 G2 Maintenance And Service Manual

Internal base enclosure

Internal base enclosure removal procedures for HP EliteBook 745 models and HP EliteBook 755
models are in separated in the following sections.

Internal base enclosure (HP EliteBook 745 models)

Description
Internal base enclosure for use only on HP EliteBook 745 models
Before removing the internal base enclosure, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the following components:
a. Service door (see
b. Battery (see
c. Keyboard (see
Use the following image as an overview of all internal base enclosure screw locations.
Remove the internal base enclosure:
1. Position the computer upside down.
64 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts
Service door on page
Battery on page 46)
Keyboard on page 55)
44)
Spare part number
779684-001