Memory Module - HP EliteBook 745 G2 Maintenance And Service Manual

Memory module

Description
8 GB memory module (PC3L, 12800, 1600 MHz)
4 GB memory module (PC3L, 12800, 1600 MHz)
Update BIOS before adding memory modules
Before adding new memory, make sure you update the computer to the latest BIOS. For Windows 8.1
models, see
on page 101. For Ubuntu models, go to http://www.hp.com/support, and select your country. Select
Drivers & Downloads, and then follow the on-screen instructions.
CAUTION:
result in various system problems.
Before removing a memory module, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the service door (see
5. Remove the battery (see
Remove the memory module:
1. Spread the retaining tabs (1) on each side of the memory module slot to release the memory
module. (The edge of the module opposite the slot rises away from the computer.)
Updating the BIOS on page
Failure to update the computer to the latest BIOS prior to installing new memory may
Battery on page
94, and for Windows 7 models, see
Service door on page 44).
46).
Spare part number
693374-001
691740-001
Updating the BIOS
Component replacement procedures 49