HP EliteBook 745 G2 Maintenance And Service Manual page 60

2. Loosen the 4 hard drive screws (1). Slide the hard drive (2) forward, and then remove it (3).
3. If it is necessary to disassemble the hard drive, perform the following steps:
a. Remove the four Phillips PM3.0×3.0 screws (1) that secure the hard drive bracket to
the hard drive.
b. Slide the hard drive bracket (2) off the hard drive.
Reverse this procedure to reassemble and install the hard drive.
48 Chapter 5 Removal and replacement procedures for Customer Self-Repair parts