Installing A Tower Model - Compaq ProLiant 5500 Setup And Installation Manual

2-6 Installation Overview
12. Turn on the computer and insert SmartStart and Support Software CD to
configure and manage the server. When the server boots from the
SmartStart and Support Software CD, it automatically starts the System
Configuration Utility. See Chapter 5 for detailed information.
13. Register your server.
For complete details on the SmartStart and Support Software program, read the
installation card included in your SmartStart and Support Software package.
After the SmartStart and Support Software program has configured your
system, your server installation is complete.

Installing a Tower Model

Below are the general steps for installing your tower model ProLiant 5500
server:
1. Unpack the server.
2. Install any hardware options in the server. See Chapter 6 of this guide
for installing the Integrated Management Display in your tower model.
See Chapter 4 and the options kits for detailed instructions on installing
other options and components.
3. Set switches: peripheral board switches, system board switches, and
SCSI ID settings. See Chapter 4 for detailed information.
4. Connect cables: keyboard, mouse, monitor, network, and power cables.
See Chapter 7 and Chapter 8 for detailed instructions.
5. Turn on the computer and insert the SmartStart and Support Software
CD to configure and manage the server. When the server boots from the
SmartStart and Support Software CD, the System Configuration Utility
automatically begins. See Chapter 5 for detailed information.
6. Register your server.
For complete details on the SmartStart and Support Software program, read the
installation card included in your SmartStart and Support Software package.
After the SmartStart and Support Software program has configured your
system, your server installation is complete.
For use with Pentium II Xeon and Pentium III Xeon processor-based servers only