Pipeline (Studio One Professional) - PRESONUS AudioBox Stereo Quick Start Manual

13.11 Pipeline (Studio One Professional)

As mentioned in section 9.2.9 of this manual, Pipeline allows hardware processors to be
inserted on audio channels in much the same way that virtual effects are inserted. This feature
is commonly called a "hardware insert."
13.11.1 Configuring an Instance of Pipeline
Insert an instance of Pipeline on any channel just like any other effect, either by dragging it in
from the Browser, or through the Add menu in the Insert Device Rack. Note that there are
Mono and Stereo versions of Pipeline; use the version that is appropriate for your hardware
processor.
The Pipeline interface features the following controls:
• Signal Scope. Displays an overlay of the send and return signals.
o
Label. Click in the empty space to type in a label. This is used to clearly identify the
inserted hardware.
Send controls:
• Gain. Adjust the send gain to prevent clipping the hardware input.
• Output Selection. Select the Output Channel that is used to route audio from Studio
One to your hardware processor.
Offset. Set an offset value in samples to account for the latency induced directly by AD/DA
converters and hardware processors.
Return controls:
• Gain. Adjust the return gain as needed to prevent clipping after the hardware insert.
226